New Holland BC5000 Series
Small Square Baler Specifications
BC5050 BC5060 BC5070 BC5080
MODEL
BC5050
BC5060
BC5070
BC5080
BALE SIZE:
Cross section, in. (cm)
Length, in. (cm)
14x18 (36x46)
14x18 (36x46)
14x18 (36x46)
16x18 (41x48)
................................................................................Adjustable, 12 to 52 (31 to 132) ..............................................................................
SUPER-SWEEP PICKUP:
Width inside, in. (m)
Width on flare, in. (m)
Number of teeth
Floating windguard
Drive
65 (1.65)
65 (1.65)
75 (1.9)
75 (1.9)
70 (1.8)
70 (1.8)
80 (2)
80 (2)
88 on four tooth bars
Eight rods
110 on five tooth bars
Eight rods
156 on six tooth bars
Thirteen rods
—
156 on six tooth bars
Thirteen rods
—
........V-belt to roller chain to “lost motion” reel drive ..........
Gauge wheel
3.00x12; semi-pneumatic
3.00x12; semi-pneumatic
15x6.00x6
15x6.00x6
ROTARY FEEDING SYSTEM:
Type
—
—
Packer fork in combination
with two paired rotors
Packer fork in combination
with three paired rotors
Packer fork in combination
with three paired rotors
Drive
............................Chain from main drive shaft; sealed ball bearings on all shafts ..........................
FLOW-ACTION® FEEDING SYSTEM:
Type
Six feeder tines on a moving
finger bar
Chain; sealed ball bearings
—
—
—
Drive
—
—
—
FEED OPENING, sq. in. (cm3)
283 (1826)
283 (1826)
283 (1826)
318 (2052)
PLUNGER:
Stroke length, in. (cm)
Speed (540 rpm)
Construction
30 (76.2)
79 SPM
30 (76.2)
93 SPM
30 (76.2)
93 SPM
30 (76.2)
93 SPM
..........High-strength steel throughout; modified extension is built into the plunger face, eliminating the need for bolt-on extensions ........
TYING MECHANISMS:
Type
Knotter
Shearbolt
Four balls
NA
Knotter or twister
Shearbolt
Knotter or twister (heavy-duty) Knotter (heavy-duty)
Protection
Shearbolt
Eight balls
Four coils
Shearbolt
Eight balls
NA
Capacity (twine)
(wire)
Six balls
Four coils
MAIN DRIVE:
Flywheel diameter, in. (cm)
PTO
22 (56)
22 (56)
22 (56)
22 (56)
Three-joint
Three-joint
Three-joint
Three-joint
Protection
..........................................................................Shearbolt, overrunning and slip clutches ........................................................................
................................................Hypoid with tapered roller bearings; heat-treated alloy steel running in oil..............................................
Gearbox
TIRES:
Flotation (right)
(left)
25x7.50-15, 6PR
27x9.50-15, 6PR
27x9.50-15, 6 PR
31x13.50-15, 6PR
27x9.50-15, 6PR
31x13.50-15, 6PR
11Lx15, 6PR
14Lx16.1, 6PR
DIMENSIONS:
Height (max.), in. (cm)
Width, in. (cm)
58 (146)
70 (178)
71 (180)
71 (180)
108 (275)
110 (279)
120 (304)
120 (304)
Length:, in. (cm)
With 3-joint PTO and
quarter-turn bale chute
240 (610)
247 (626)
247 (626)
247 (626)
Page 1of 2
|