New Holland
Front Blades – Quick-Attach Specifications
54CB 60CB 60CBH 72CB 72CBH 84CBH
MODEL
54CB
60CB
60CBH
72CB
72CBH
84CBH
Moldboard width, in. (mm)
Moldboard height, in. (mm)
54 (1372)
17 (432)
60 (1524)
19 (483)
60 (1524)
22 (559)
72 (1829)
22 (559)
72 (1829)
22 (559)
84 (2134)
22 (559)
Reversible cutting edge ......................................................................................................................standard...........................................................................................................
Cutting edge thickness, in. (mm)
Manual angling
Hydraulic angling
0.375 (10)
standard
n/a
0.5 (13)
n/a
standard
0.5 (13)
n/a
standard
0.5 (13)
n/a
standard
0.5 (13)
n/a
standard
0.5 (13)
n/a
standard
Angling range, degrees........................................................................................................................0 to 30 ...........................................................................................................
Adjustable skid shoes.........................................................................................................................standard...........................................................................................................
Weight, lbs. (kg)
120 (54)
311 (141)
311 (141)
535 (243)
540 (245)
570 (259)
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
|