New Holland
™
Super Boom Skid Steer Specifications
L150 L160 L170 L175 L180 L185 L190
MODEL
L150
L160
L170
L175
L180
L185
L190
ENGINE
Make and model, New Holland
N843H
N844
N844T
NH844LT
334/M2
334T/M2
445/M2
Type of fuel...............................................................................................................................................Diesel..........................................................................................................
Gross power @ RPM, hp (kW)
Net power @ RPM, hp (kW)
38 (28) @ 3200
36 (27) @ 3200
46 (34) @ 2900 52 (39) @ 2900
44 (33) @ 2900 50 (37) @ 2900
60 (45) @ 2900
56 (42) @ 2900
63 (47) @ 2300
59 (44) @ 2300
78 (58) @ 2300
72 (54) @ 2300
80 (60) @ 2300
74 (55) @ 2300
Peak torque, lb.-ft. (N-m) @ RPM 73 (99) @ 1700 101 (137) @ 1700 113 (153) @ 1700 128 (174) @ 1700 179 (243) @ 1400 228 (309) @ 1400 236 (320) @
1400
Number of cylinders
Displacement, cu. in. (l)
3
4
4
4
3
3
4
91 (1.5)
121.7 (2.0)
121.7 (2.0)
135.3 (2.2)
204 (3.4)
204 (3.4)
274 (4.5)
DRIVE TRAIN
Max travel speed, fwd, mph (kph)
-with 2 speed transmission,
mph (kph)
7.3 (11.8)
7.3 (11.8)
7.3 (11.8)
5.9 (9.5)
6.9 (11.1)
6.9 (11.1)
7 (11.3)
NA
50/80 HD
10.00x16.5
NA
NA
10 (16.1)
80 HD
12.00x16.5
11.3 (18.2)
100 HD
12.00x16.5
11.3 (18.2)
100 HD
12.00x16.5
11.4 (18.3)
100 HD
14.00x17.5
Drive chain size
Tire size
80 HD
80 HD
10.00x16.5
10.00x16.5
HYDRAULICS
Total flow, gpm (l/min)
Main relief pressure, psi (kPa)
Optional high flow, gpm (l/min)
11.6 (43.9)
2500 (172)
NA
15.1 (57.2)
2500 (172)
NA
17.2 (65.1)
2500 (172)
30.3 (114.7)
17.2 (65.1)
2550 (176)
30.3 (114.7)
19.3 (73.1)
3050 (210)
34.7 (131.3)
19.3 (73.1)
3050 (210)
34.7 (131.3)
21.9 (82.9)
3050 (210)
37.3 (141.2)
PERFORMANCE / LOADER ARMS
Linkage geometry.................................................................................................................................Vertical lift......................................................................................................
Rated operating load, lbs. (kg)
Bucket breakout force,, lbf (kN)
Boom break out force, lbs. (kg)
Max. dump angle at full height, degrees
Dump clearance at full height
discharge, in. (mm)
1,350 (612)
3,500 (1591)
2,400 (1089)
45
1,600 (726)
3,712 (1687)
2,828 (1285)
45
1,765 (801)
3,712 (1687)
2,828 (1285)
45
2,000 (907)
4,312 (1956)
3,003 (1362)
43
2,200 (998)
6,034 (2737)
4,194 (1902)
45
2,500 (1134)
7,670 (3479)
4,836 (2194)
45
2,800 (1270)
7,670 (3479)
6,229 (2825)
45.3
87.9 (2230)
92.1 (2340)
92.1 (2340)
95.4 (2420)
100 (2540)
100 (2540)
102 (2590)
Dump reach at full height
discharge, in. (mm)
25 (640)
29 (740)
115.5 (2930)
37
29 (740)
115.5 (2930)
37
29 (740)
119.7 (3040)
37
32.5 (830)
124.6 (3160)
37
32.5 (830)
124.6 (3160)
37
32.3 (820)
125.6 (3190)
37
Max. hinge pin height, in. (mm)
114.3 (2900)
Bucket rollback at carry position, degrees 36
DIMENSIONS
Length with bucket down, in. (mm) 120 (3050)
125 (3180)
60 (1520)
65.6 (1670)
74.8 (1900)
42.5 (1080)
7.4 (190)
125 (3180)
66 (1680)
65.6 (1670)
74.8 (1900)
42.5 (1080)
7.4 (190)
129.5 (3290)
72 (1830)
139 (3530)
72 (1830)
71.25 (1810)
77 (1960)
48 (1220)
8 (200)
139 (3530)
72 (1830)
71.25 (1810)
77 (1960)
48 (1220)
8 (200)
145.7 (3700)
78 (1980)
76.4 (1940)
79.6 (2020)
51.5 (1310)
10.1 (260)
Width with bucket, in. (mm)
Width over tires, in. (mm)
Height to top of ROPS, in. (mm)
Wheelbase, in. (mm)
60 (1520)
60 (1520)
73.4 (1860)
37.5 (950)
8.25 (210)
70.8 (1800)
76 (1930)
42.5 (1080)
8.4 (210)
Ground clearance, in. (mm)
OTHER FEATURES
Standard ROPS
Tilt forward
Tilt forward
Tilt forward
Tilt back
Tilt forward
Tilt forward
Tilt forward
Self leveling bucket....................................................................................................................................Std. ..........................................................................................................
OPERATING WEIGHT, lbs. (kg)
4,500 (2042)
5,534 (2510)
5,540 (2513)
6,230 (2826)
7,095 (3218)
7,100 (3220)
7,755 (3518)
SERVICE CAPACITIES
Fuel tank, gal. (l)
Cooling system, gal. (l)
Hydraulic system total, gal. (l)
8.75 (33)
2.45 (9.3)
5 (18.9)
14.4 (55)
2.7 (10.2)
8.6 (32.6)
14.4 (55)
2.7 (10.2)
8.6 (32.6)
14.4 (55)
4.5 (17)
8.6 (32.6)
18 (68)
4.5 (17)
15 (57)
18 (68)
4.5 (17)
15 (56.8)
21.5 (81)
4.5 (17)
15 (56.8)
L150 - Equipped with 60" 11.5 cu. ft. dirt and foundry bucket and 10.00 x 16.5 tires
L160 - Equipped with 60" 11.5 cu. ft. low profile bucket and 10.00 x 16.5 tires
L170 - Equipped with 66" 15.2 cu. ft. dirt and foundry bucket and 10.00 x 16.5 tires
L175 - Equipped with 72" 17.1 cu. ft. low profile bucket and 12.00 x 16.5 tires
L180 - Equipped with 72" 17.1 cu. ft. low profile bucket and 12.00 x 16.5 tires
L185 - Equipped with 72" 16.7 cu. ft. dirt and foundry bucket and 12.00 x 16.5 tires
L190 - Equipped with 78" 25.8 cu. ft. dirt and foundry bucket and 14.00 x 17.5 tires
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
|