NEC Telephone Xen User Manual

digital  
telephone  
DowunloasdefromrWwgw.uSomiadnuaels.com. All Manuals Search And Download.  
Table of Contents  
General Information  
Answering Calls  
Pages 2 & 3  
Making Calls  
Microphone Control  
Handsfree Calls  
Placing a call on Hold  
Pages 4 - 5  
Transferring Calls  
Conference  
Call Park - System  
Station Busy/No Answer Options  
Pages 6 - 7  
Pages 8 - 9  
Outside Call Dialling Options  
Call Pickup  
Paging  
Background Music  
Call Forwarding  
Pages 10 - 11  
Call Forwarding Destination  
Customised Message  
Station Outgoing Lockout  
Account Code Entry  
Account Code Forced/Verified  
Pages 12 - 13  
Pages 14 - 15  
DISA Password  
ACD/UCD  
Volume Control  
Programming  
Feature Access Keys\  
One Touch Keys  
Character Entry Codes  
Pages 16 - 17  
Pages 18 - 19  
Quick Entry Guide  
Quick Reference Guide  
 
General Information  
The following should be considered when reviewing this User Guide:  
Instructions are provided for the Xen digital telephones (DTU-type). When  
using a Ranger Series digital telephone (ETU-type), note that ANS=Answer,  
TRF=Transfer, SPKR=Speaker, CNF=Conf, FNC=Feature, LNR/SPD=Redial.  
All operational instructions assume Prime Line Pickup is assigned to intercom  
dial tone, Ringing Line Preference is assigned to all telephones, a Call  
Appearance and Call Arrival key has been assigned to all digital telephones  
and only a single tenant has been assigned in the system.  
All access codes listed are standard; some may vary based on system  
assignment. Please consult your authorised NEC Dealer for the access codes  
applicable to your system.  
Access to many features is based on system assignments. Not all features  
may be available from your telephone.  
Telephones equipped with displays will provide useful call processing  
information such as digits dialled, recall indications, feature confirmation,  
etc. Xen digital telephones (DTU-type) also show features accessible by the  
soft keys.  
LED Indications  
Function  
Lamp Status  
Line Keys:  
Incoming Call  
Rapid Flashing Red  
Slow Flashing Green  
Slow Flashing Red  
Held Call - Your telephone  
Held Call - Other telephone  
Call in progress  
Your telephone  
Steady Green  
Other telephone  
Hold recall  
Steady Red  
Intermittent Flashing Green  
Large LED: (360˚ Visual Ring Indicator)  
Incoming calls (CO/PBX, DIT  
Rapid Flashing Green  
or ANA)  
Incoming intercom, TIE Line  
or DID Call  
Rapid Flashing Red  
Message from Attendant  
Voice Mail Message  
Slow Flashing Green  
Slow Flashing Red  
Feature Key:  
DND Set  
Call Forward Set  
Callback Request  
Intermittent Flashing Red  
Intermittent Flashing Red  
Slow Flashing Red  
Intercom LED:  
Incoming Call  
Call in progress  
Held Call  
Flashing Red  
Steady Red  
Flashing Red Conf LED  
2
 
Answering Calls  
Ringing Calls  
Lift Handset  
Converse  
Note: When assigned the delayed ringing feature, incoming calls will first ring at a  
primary station. If the call is unanswered after a preprogrammed time interval, calls will  
also ring at the assigned secondary station.  
Ringing Calls To A Call Arrival Key  
Lift handset  
Converse  
Note 1: A Call Arrival key must be assigned to appear and ring at a Line Key/Feature  
Access Key.  
Note 2: A Call Appearance key must be available to answer an incoming outside call.  
Voice Announce Calls  
Ensure microphone (MIC) LED is lit  
Adjust Speaker volume or as needed  
Respond handsfree  
Note: The handset may be used at any time during the conversation  
Camp-on (Call Waiting)  
Receive camp-on tone while on another call  
Replace handset to disconnect present call OR press Hold and press the  
Hookswitch to converse with second party.  
Call Alert Notification  
With a call in progress  
Receive Call Alert Notification  
Press Hold, converse with second party  
Note 1: The second call may be placed on hold if the line appearance is assigned or if a  
Call Appearance key is available  
Note 2: Press flashing Line Key, Call Appearance key or Conf key to return to the first  
call.  
3
 
Making Calls  
Internal Calls  
Lift handset  
Dial station number or “9” for the attendant (or reception)  
OR press Feature Access Key or One Touch Key programmed for  
Direct Station Selection  
Voice announce after tone burst or wait for ringing call to be answered.  
Note 1: When calling a digital telephone, dialling 1 after the station number will change  
ringing to voice or voice to ringing.  
Note 2: To directly access a personal voice mailbox on the Xen Mail system, dial 7 after  
dialling the station number.  
Outside Calls  
Lift handset  
Dial trunk access code i.e 0  
OR press idle Outside Line Key  
Dial telephone number  
Converse  
Preset Dialling  
Dial the desired number  
Lift handset  
Converse  
Last CO/PBX Number Redial  
Lift handset  
Press Redial  
Dial Last Number Redial code #  
Converse  
Speed Dial- Using The Redial (LNR/SPD) key  
Lift handset  
Press Redial (LNR/SPD) and dial Speed Dial Memory Location:  
Station Speed Dial  
System Speed Dial  
80-99  
00-79  
OR press Feature Access key or One Touch Key programmed for  
Station Speed Dial  
Converse  
Speed Dial - Using The Softkeys  
Press the SYS. or STA. Softkey (  
)
(System or Station Speed Dial respectively)  
Continued next page  
4
 
Press the UP or DOWN softkey ( ), repeatedly until the desired  
name/number is displayed.  
To search alphabetically (optional step):  
Press the dial key showing the first letter of the name to be dialled  
Continue to press this dial key until the desired letter is displayed  
Press to display the first match corresponding the chosen letter  
*
Lift handset to dial the displayed name/number  
Trunk Queuing  
After dialling trunk access code or pressing a busy Line Key and receiving a  
line busy indication:  
Dial Trunk Queue set code 78  
Replace handset  
Note: When a line is available, your telephone will ring: lift handset and place call.  
Microphone Control  
Press Feature  
Dial MIC On/Off code 1  
Note 1: Lit MIC LED indicates MIC on  
Note 2: MIC ON/OFF key may be assigned to a Feature Access Key or One Touch Key  
Note 3: If talking on handset rather than handsfree, the handset microphone will be  
muted and the MIC LED will flash.  
Handsfree Calls  
Press Speaker, LED lights  
Ensure MIC LED is lit  
Place internal or outside call  
Converse  
Press Speaker to disconnect call  
Note: The handset may be used at any time during the conversation. To resume  
handsfree operation or to monitor a call, press Speaker (LED lights) and replace handset.  
Placing A Call On Hold  
Non-Exclusive Hold  
With a call in progress:  
Press Hold  
5
 
Placing A Call On Hold (Continued)  
Exclusive Hold  
With a call in progress:  
Press Feature  
Press Hold  
Note 1: To retrieve a held call, press the flashing Line Key, Call Appearance Key or Conf  
key (for internal calls).  
Note 2: Call on Non-Exclusive Hold can be retrieved from any digital telephone with the  
held line appearance or Call Appearance key.  
Note 3: After a preprogrammed time, the held call will recall to the originating  
station.Once in a recall condition, Exclusively Held calls can be retrieved from any  
station with the held line appearance or Call Appearance key.  
Transferring Calls  
Using Manual Dial  
With a call in progress  
Press Transfer  
Using Direct Station  
Selection (DSS)  
With a call in progress  
Press Transfer  
Dial station number  
Announce call (optional)  
Replace handset  
Press programmed DSS  
Announce call (optional)  
Replace handset  
Note 1: If the called station is busy, replace handset to initiate a camp-on. Unanswered  
camp-ons and unscreened transfers will recall to the attendant telephone. After  
answering the recall, pressing Feature 86 will transfer the call to the personal voice  
mailbox of the station number dialled.  
Note 2: To return to the original party, press flashing Line Key, Call Appearance key or  
Conf key.  
Note 3: A Feature Access Key or One Touch Key may be assigned for DSS.  
Note 4: To transfer a call directly to a personal voice mailbox, dial 7 after dialling the  
station number.  
Conference  
With a call in progress  
Press Conf  
Place second call (internal or external)  
Announce conference  
Press Conf to establish conference  
Note 1: Repeat above procedure to add an additional party. (Max 2 outside parties).  
Note 2: An unsupervised conference may be established by pressing the Conf key again,  
after the conference has been established. The parties may continue to converse in  
private. Press the flashing Conf key to return to the conversation.  
6
 
Call Park - System  
Set  
Retrieve  
From any station  
Lift handset  
With a call in progress  
Press Transfer  
Dial Call Park Set code 4  
Dial Call Park location 0-9  
Replace handset  
Dial Call Park Retrieval  
code 4#  
Dial Call Park Location 0-9  
Converse  
*
Note: If the dialled Call Park location is busy, dial another Call Park location (0-9).  
Station Busy/No Answer Options  
Automatic Callback  
Set  
Answer  
When calling a busy digital  
telephone  
When both telephones are idle  
originating telephone rings  
Lift handset  
Dial Automatic Callback code 0  
Replace handset  
Call is placed automatically  
Callback Request  
Set  
When calling a busy or  
unanswered digital telephone  
Dial Callback Request code #  
Replace Handset  
Answer  
Receive display and/or Feature  
LED message indication:  
Lift handset  
Dial #; request originator is  
automatically called  
Repeat above procedure to  
respond to additional messages  
Note: Callback messages are automatically cancelled once the originating station is  
called.  
Tone Override  
Set  
Answer  
When calling a busy digital  
telephone:  
With a call in progress:  
Receive tone override signal  
Press Hold  
Dial Tone Override code  
*
to send tone  
Converse with second party  
Wait for signalled party to answer  
If handsfree, a visual indication only ( ) will be provided on the  
*
telephone’s display.  
Note: An Override Tone will be sent each time “ ” is pressed.  
*
7
 
Station Busy/No Answer Options (Continued)  
Step Call  
When calling a busy telephone  
Dial 2 to advance to the next station number in that 10’s group  
Voice Over  
Originate  
When calling a busy telephone:  
Dial Voice Over code 6  
Announce message  
Answer  
Whisper Page  
With a call in progress:  
Receive Voice Over  
announcement  
With a call in progress:  
Receive Voice Over  
announcement  
Press Hold  
Converse with Voice Over  
originator  
Press Answer key to alternate  
between parties  
Press Feature  
Dial 65  
Converse with Voice Over  
originator while monitoring  
first call  
Press Feature  
Dial 65  
Converse with first caller while  
monitoring Voice Over  
originator  
Note: The Whisper Page Access Code may be assigned to a Feature Access Key or One  
Touch Key.  
Outside Call Dialling Options  
Save & Repeat  
Save  
Repeat  
Lift handset  
With an originating outside  
call in progress:  
Press Redial  
Press Feature  
Dial 9; called number is stored  
Replace handset  
Dial #; stored number is  
dialled  
8
 
Outside Call Dialling Options (Continued)  
Store & Repeat  
Store  
Repeat  
With an outside call in progress:  
Press Feature  
Lift handset  
Press Redial  
Dial 7  
Dial ; stored number is  
*
Dial new phone number to  
be stored  
dialled  
Press Feature  
Complete conversation and  
replace handset  
Note: Store & Repeat and Save & Repeat features cannot be used simultaneously.  
Automatic Redial  
After originating a busy or unanswered outside call:  
Press Speaker  
Replace handset  
Press Feature  
Press Redial  
Call is repeatedly dialled until answered, cancelled or the  
maximum number of redial attempts is reached  
Lift handset when the called party answers  
Note 1: Press Speaker to cancel Automatic Redial.  
Note 2: System programming determines waiting time and number of redial attempts.  
Caller ID  
Answer  
Placing Caller ID Calls  
Press SCROLL repeatedly until  
desired number is displayed  
Lift handset to automatically  
dial displayed number  
Converse  
Receive incoming ringing or  
transferred outside call:  
Review telephone display for  
calling party’s name or number  
Answer call accordingly  
Note 1: Caller ID will be displayed even when station is busy or in DND mode, allowing  
the user to identify the incoming call.  
Note 2: The last 10 calls received with caller ID information are stored and are accessible  
with the SCROLL key.  
Note 3: Least Cost Routing (LCR) is required to automatically dial Caller ID calls.  
Note 4: Press lit Line Key to review calling party’s name or number while the call is in  
progress.  
9
 
Call Pick Up  
Call Pick Up System  
Upon hearing ringing at  
another telephone:  
Lift handset  
Call Pick Up Direct  
Upon hearing ringing or voice  
announcement at another  
telephone:  
Dial Call Pickup code:  
-All Calls  
-Outside Line  
-Night Call Pickup  
Converse  
Lift handset  
68  
6
69  
Dial Call Pickup Direct code 67  
Dial station number of the  
telephone to be answered  
Converse  
*
Paging  
Lift handset  
Dial paging code:  
Internal  
External  
-All zones 51  
-All int. & ext. 59  
-Zone A  
-Zone B  
-Zone C  
52  
53  
54  
-All zones  
-Zone A  
-Zone B  
-Zone C  
55  
56  
57  
58  
Page  
Wait for Meet-Me Answer or replace handset  
Meet-Me Answer  
Lift handset  
Dial Meet-Me Answer code:  
-Internal Page 5  
*
-External Page 5 #  
Converse  
Background Music  
Set/Cancel  
Press Feature  
Dial BGM On/Off code 26  
Note: A BGM key may be assigned in system programming to set/cancel the Background  
Music feature.  
10  
 
Call Forward All Calls (CF/A)  
Do Not Disturb (DND)  
Set  
Cancel  
Press Feature  
Press Feature  
Dial Call Forward All/DND  
set code 60  
Select operation  
Dial Call Forward All/DND  
cancel code 69  
Press Feature  
-DND: Press Feature  
-Call Forward All: Dial  
destination station number or  
voice mail and press Feature  
Note 1: The Feature LED will flash intermittently when your telephone is in Call  
Forward/DND.  
Note 2: While set, Call Forward All will override Call Forward Busy/No Answer setting.  
Note 3: If Call Forward All and Do Not Disturb are both set, the feature set last is  
activated.  
Note 4: A CFA/DND key may be assigned in system programming to set/cancel this  
feature. When setting Call Forward All, a destination station must be entered. A lit LED  
indicates that Call Forward All/Do Not Disturb is set.  
Call Forward Busy/No Answer (B/NA)  
Set  
Cancel  
Press Speaker  
Press Speaker  
Dial Call Forward B/NA  
set code 43  
Dial Call Forward cancel code 44  
Press Speaker  
Dial destination station number  
or voice mail  
Press Speaker  
Note 1: The Feature LED will flash intermittently when your telephone is in Call Forward.  
Note 2: While set, Call Forward All will override Call Forward Busy/No Answer setting.  
Note 3: A CF B/NA key may be assigned in system programming to set/cancel this  
feature. When setting Call Forward Busy/No Answer, a destination station must be  
entered. A lit LED indicates that CF B/NA is set.  
11  
 
Call Forward Destination  
From Destination Station  
Set  
Cancel  
Press Speaker  
Dial Call Forward All Destination  
set code 47  
Press Speaker  
Dial Call Forward All Destination  
cancel code 48  
Dial your station number  
Dial destination station number  
or voice mail  
Dial your station number  
Press Speaker  
Press Speaker  
Customised Message  
From display telephone:  
Press Feature  
Dial Customised Message code 70  
Dial to scroll through messages  
*
Dial # to select messages  
Dial return date and time if required (Month/Day, Hour/Minute,  
using 4-digit, 24 hour clock)  
Press Feature \  
Note: When your telephone is set for Do Not Disturb, other display telephones will  
receive your message upon calling your station.  
Station Outgoing Lockout  
Changing Lockout Code  
Press Speaker  
Dial Lockout Change access code_____  
Dial current Lockout code  
Dial new Lockout code  
Press Speaker  
Note 1: By default, Lockout code is set at 0000000000 (10 zeros).  
Note 2: When Lockout code is set for the first time, station is automatically restricted.  
Note 3: Lockout code may be a maximum of 10 digits. If the new Lockout code is less  
than 10 digits, press the Speaker to re-enter.  
Note 4: When set, Station Outgoing Lockout restricts all outgoing calls.  
12  
 
Set/Cancel Station Outgoing Lockout  
Press Speaker  
Dial Station Lockout  
-Set code _____  
-Cancel code _____  
Dial Lockout code  
Press Speaker  
Account Code Entry  
With an outside call in progress With an outside call on hold:  
Press Feature  
Dial 66  
Dial Account Code  
(16 digits maximum)  
Press Feature  
Dial Account Code Entry  
Code_____  
Dial Account Code  
(16 digits maximum)  
Retrieve held call  
Note 1: The outside party will not hear digits being dialled.  
Note 2: The Account Code Entry Code may be assigned to a Feature Access Key or  
One Touch Key.  
Account Code Forced/Verified  
To place an outside call:  
Lift handset  
Dial Forced Account access code_____  
Dial Forced Account code_____(up to 13 digits)  
Dial trunk access code i.e. 0 and outside number  
Note: When calling from a station that is assigned the Account Code Forced/Verified  
feature, outgoing call will only be processed after the dialled Account Code is verified.  
13  
 
DISA Password  
Setting Your DISA Password  
Lift handset  
Dial DISA Password set access code___  
Dial your DISA ID code____  
Dial your current DISA password___ default 0000000000 (10 zeros)  
Dial your new DISA password___  
Replace handset  
Note 1: Password may be a maximum of 10 digits. If the new password is less than 10  
digits, replace the handset to enter.  
Note 2: It is recommended that your DISA password be 10 digits and be changed  
frequently to prevent unauthorised use.  
ACD/UCD  
Log On  
Log Off  
Press Speaker  
Press Speaker  
Dial access code____  
Dial 1  
Press Speaker  
Dial access code____  
Dial 2  
Press Speaker  
Note: A LOG key may be assigned in system programming to log/off from the ACD/UCD  
group. A lit led indicates that the station is logged-on.  
Break Mode  
Set  
Cancel  
Press Speaker  
Press Speaker  
Dial 40  
Dial 42  
Press Speaker  
Press Speaker  
Note 1: Break Mode is only available while an agent is logged-on.  
Note 2: A Break key may be assigned in system programming to set/cancel Break Mode.  
A lit LED indicates that the station is in Break Mode.  
Answering Call Using Headset  
Press HEADSET to answer  
Converse  
Press HEADSET to hang up  
14  
 
Volume Control  
Off-Hook Ringing  
Ringing Volume  
Volume  
Lift handset  
Press Speaker  
Dial 60  
Dial 60  
Dial Off-Hook Ringing  
Volume code 1  
Press or to set level  
Replace handset  
Dial Ringing Volume code 1  
Press or to set level  
Press Speaker  
Note 1: Press or during audible telephone activity to adjust handset or speaker  
volume.  
Note 2: When the telephone is idle, or is used to adjust display contrast.  
Programming  
Resetting Feature LED  
Press Feature  
Dial 99  
Press Feature  
Note: Resetting the Feature LED will cancel Call Forward All Calls, Do Not Disturb and  
Callback Request settings.  
Station Speed Dial - Dial Access  
Press Feature  
Press Redial  
Dial Speed Dial Memory location 80-99  
Dial trunk access code i.e. 0 (if necessary)  
Dial telephone number to be stored (24 digits maximum)  
Press Hold (if entering name) and dial name of party  
(13 letters maximum)  
Press Feature  
Note 1: Press Redial to insert a pause or Recall to store a hookflash.  
Note 2: Refer to Character Entry Codes when entering name of party.  
Note 3: Station Speed Dial is not available when 1000 System Speed Dial mode  
is selected.  
15  
 
Feature Access Keys  
Station Speed Dial  
(Outside Numbers)  
Press Feature  
DSS/BLF (Stations)  
And Feature Access  
Press Feature  
Press Redial  
Press Redial  
Press Feature Access Key to be  
programmed  
Dial 1 and station number  
to be stored  
Press Feature Access Key  
to be programmed  
Dial 0  
Dial trunk access code  
i.e 0 (if necessary)  
Dial telephone number to be  
stored (16 digits maximum)  
Press Feature  
OR dial feature access code  
to be stored as indicated  
in the Quick Entry Guide  
Press Feature  
Note 1: Press Redial to insert a pause and Recall to insert a hookflash.  
Note 2: Busy Lamp Field status indication will be provided on keys programmed for DSS.  
One Touch Keys  
Station Speed Dial  
(Outside Numbers)  
Press Feature  
DSS/BLF (Stations)  
And Feature Access  
Press Feature  
Press Redial  
Press One Touch Key to  
be programmed  
Press Redial  
Press One Touch Key  
to be programmed  
Dial 1 and station number  
to be stored  
Dial 0  
Dial trunk access code  
i.e 0 (if necessary)  
Dial telephone number to be  
stored (16 digits maximum)  
Press Feature  
OR dial feature access code  
to be stored as indicated  
in the Quick Entry Guide  
Press Feature  
Note 1: Press Redial to insert a pause and Recall to insert a hookflash.  
Note 2: Busy Lamp Field status indication will be provided on keys programmed for DSS.  
16  
 
Character Entry Codes  
Character  
Code  
Character  
Code  
Character  
Code  
Blank  
!
032  
033  
034  
035  
036  
037  
038  
039  
040  
041  
042  
043  
044  
045  
046  
047  
048  
049  
050  
051  
052  
053  
054  
055  
056  
057  
058  
059  
060  
061  
@
A
B
C
D
E
064  
065  
066  
067  
068  
069  
070  
071  
072  
073  
074  
075  
076  
077  
078  
079  
080  
081  
082  
083  
084  
085  
086  
087  
088  
089  
090  
091  
\
096  
097  
098  
099  
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
#
$
%
&
'
(
)
*
+
,
-
-
/
0
1
2
3
4
5
6
7
8
9
:
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
s
t
T
U
V
W
X
Y
Z
[
u
v
w
x
y
z
122  
123  
124  
125  
126  
127  
;
<
=
<
?
{
¥
]
092  
093  
094  
095  
}
062  
063  
_
17  
 
Quick Entry Guide For Programming  
Feature Access Keys and One Touch Keys  
Feature  
Press  
Microphone On/Off  
# 1  
Call Forward All Set  
# 60 Dial destination Answer  
Feature (FNC) Feature (FNC)  
Do Not Disturb - Set  
# 60 Answer Feature (FNC)  
Feature (FNC)  
Call Forward All/DND - Cancel  
# 69 Answer Feature (FNC)  
Feature (FNC)  
Save & Repeat - Set  
Store & Repeat - Set  
Whisper Page  
# 9  
# 7  
# 65  
# 86  
# 26  
1 6  
Quick Transfer To Voice Mail  
Background Music  
Voice Over Originate  
Call Forward Busy/  
No Answer - Set  
1 43 Dial Destination Answer  
Speaker Feature (FNC)  
Internal Paging All Zone  
Internal Paging Meet-Me  
External Paging All Zone  
External Paging Meet-Me  
Call Pick Up All Calls  
1 51  
1 5  
*
1 55  
1 5#  
1 68  
1 67  
Call Pick Up Direct  
Note 1: When pressed, the Answer Key will not appear in the display. This is normal  
operation.  
Note 2: Other features may be programmed in addition to those listed above. Refer to the  
Xen Mail User Guide for features related to Voice Mail.  
18  
 
Quick Reference Guide  
Outside Calling  
Outside Call  
Dial 0 Dial Telephone Number  
Last CO/PBX number redial  
Speed Dial  
Redial Dial #  
Redial Dial 00-99  
Save/Store & Repeat - Access  
Trunk Queue  
Automatic Redial  
Redial Dial  
Receive Trunk Busy Indication Dial 78  
Receive busy Speaker Replace Handset  
*
Feature Redial  
Internal Calling  
Station Call  
Automatic Callback  
Callback Request  
Dial Station Number or DSS key  
Reach Busy Station Dial 0  
Reach Busy/No Answer Station Dial #  
Tone Override  
Voice Over Originate  
Quick Transfer To Voice Mail  
Reach Busy Station Dial  
Reach Busy Station Dial 6  
Dial station number or DSS key Dial 7  
*
With A Call In Progress  
Hold  
Hold  
Exclusive Hold  
Feature Hold  
Transfer  
Quick Transfer To Voice Mail  
Conference  
Transfer Dial Station Number or DSS key  
Transfer Dial Station Number or DSS key dial 7  
Conf Place 2nd Call Conf  
SET: Transfer Dial 4 Dial 0 - 9  
RETRIEVE: Dial 4 # Dial 0 - 9  
Feature Dial 9  
Call Park System  
*
Save & Repeat - Save  
Store & Repeat - Store  
Feature Dial 7 Dial number to Store  
Feature  
Whisper Page  
Receive Voice Over Feature Dial 65  
From The Intercom  
Internal Paging  
External Paging  
Call Pickup All Calls  
Call Pickup Direct  
Dial 51-54 Page  
Dial 55-59 Page  
Dial 68  
Dial 67 Dial Station Number  
From An Idle Telephone  
Microphone Control  
Feature Dial 1  
Call Forward All/DND  
SET: Feature Dial 60 Dial Destination  
Station (CF/A Only) Feature  
CANCEL: Feature Dial 69 Feature  
Call Forward Busy/No Answer  
SET: Speaker Dial 43 Dial Destination Station  
Speaker  
CANCEL: Speaker Dial 44 Speaker  
FNC LED Reset  
Feature Dial 99 Feature  
19  
 
Notes  
20  
 
Notes  
21  
 
This material contained herein is subject to change without  
prior notice at the sole discretion of NEC Australia Pty Ltd.  
VERSION 1 5/99 DOCUMENT NO. A6-324000-642-17 COPYRIGHT © 1999 NEC AUSTRALIA  
 

Miller Electric Welder DWF3 User Manual
Minolta Digital Camera X 700 User Manual
MTD Snow Blower 769 03250 User Manual
National Rice Cooker SR LA10 N User Manual
Nikon Photo Scanner SB3H0150010130 6MRA0830 User Manual
Nokia Network Card 30 GSM User Manual
Nvidia Switch PCI Express Series User Manual
Optoma Technology Projector RMC 25key User Manual
Panasonic Electric Shaver ES7036 User Manual
Panasonic Portable DVD Player DVD L50A User Manual