Miele Cooktop CS 1223 User Manual

Operating and Installation

Instructions

Induction Wok

CS 1223

en - CA

To prevent accidents and

machine damage,

read the Operating Manual

before

installation or use.

M.-Nr. 07 353 930

IMPORTANT SAFETY INSTRUCTIONS

Correct usage

WARNING- When using your

Only use the combiset for residential

cooking, and for the purposes

described in this manual.

appliance follow basic

precautions, including the

following:

Other uses are not permitted and can

be dangerous. The manufacturer will

not be held liable for damage caused

by unauthorized use or improper

operation of any kind.

Read all instructions before

installation or use to prevent

injury and appliance damage.

Persons who lack physical, sensory

This appliance conforms to all

uniform safety codes and

or mental abilities, or experience with

the appliance should not use it without

supervision or instruction by a

responsible person.

regulations. The manufacturer

cannot be held responsible for

damage or injury caused by

improper use of this appliance.

Keep these operating instructions

in a safe place and pass them on

to any future user.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Children

Technical Safety

Activate the Child Safety Lock so

that the combiset cannot be turned on

Installation, repair and maintenance

work should be performed by a Miele

authorized service technician. Work by

unqualified persons could be

inadvertently.

Children should not be left

dangerous and may void the warranty.

unattended in an area where the

appliance is in use. Never allow

children to sit or stand on any part of

the appliance.

Before installing the combiset,

check for externally visible damage.

Do not operate a damaged appliance.

Caution: Do not store items of interest

to children in cabinets above the

appliance. Children climbing on the

appliance to reach these items could

be injured.

To guarantee the electrical safety of

this appliance, continuity must exist

between the appliance and an effective

grounding system. It is imperative that

this basic safety requirement be met. If

The appliance is hot during use and there is any doubt, have the electrical

remains so for some time after being

system of the house checked by a

qualified electrician. The manufacturer

will not be held responsible for

damages caused by the lack, or

inadequacy, of an effective grounding

system.

switched off. Keep children away from

the appliance.

Ensure that any packing material, is

disposed of safely and kept out of the

reach of children. Danger of

suffocation!

Before installation, make sure that

the voltage and frequency listed on the

Keep all pots and pans out of the

reach of children. Danger of burning or

scalding.

data plate correspond with the

household electrical supply. This data

must correspond to prevent injury and

appliance damage. Consult a qualified

electrician if in doubt.

Do not use an extension cord to

connect this appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance.

Do not use the appliance until it has

been properly installed in the

countertop.

IMPORTANT SAFETY INSTRUCTIONS

Install the appliance so that the

Do not cook on a broken combiset.

~ ~

power cord does not come into contact Any breakages or cracks in the ceramic

with any portion of the cooktop which

may become hot during use.

surface of the appliance are defects

and must be treated as such. If the

combiset should break, cleaning

solutions and spills may penetrate the

broken combiset and create a risk of

Before servicing, disconnect the

appliance from the main power supply.

Do not operate any appliance with a electric shock. Do not use the

damaged cord or plug, or if the

appliance until it has been repaired.

appliance has been damaged in any

manner. Contact Miele’s Technical Ser-

vice Department.

Under no circumstances open the

outer casing of the appliance.

The combiset must not be installed

outdoors.

While the appliance is under

warranty repairs should only be

performed by an authorized service

technician. Otherwise the warranty is

void.

In the event of any damage to the

appliance, it must be turned off immedi-

ately and disconnected from the main

power supply. Contact Miele’s

Technical Service Department.

Do not use the appliance until it has

been repaired. Ensure power is not

supplied to the appliance until repair

work is completed.

Defective components should be

replaced by Miele original spare parts

only. Only with these parts can the

manufacturer guarantee the safety of

the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Safety

Do not store items on the appliance

when not in use. Items could melt or

Individuals with a pacemaker or

similar medical device:

catch fire from residual heat or if the

appliance is turned on inadvertently.

Always switch the cooking zone(s) off

after use.

Please note that an electromagnetic

field develops when the combiset is

turned on. It is not likely that this will

affect the pacemaker or similar device.

If in doubt contact the manufacturer of

the device or your doctor.

Flammable materials should not be

stored on or near the appliance.

If there is a drawer directly

Keep magnetized items, e.g. credit

underneath the appliance, ensure that

there is sufficient space between the

drawer, its contents and the underside

of the appliance to ensure sufficient

ventilation.

cards, disks, etc. away from the

combiset while in operation. Damage

may result.

Do not touch the combiset or the

surrounding areas during or immediate-

Metallic items kept in a drawer

under the combiset can become hot

ly after use. The combiset may be hot

even though it is dark in color. Wait until when the appliance is used for a longer

the residual heat indicators go out.

period of time. Use caution.

Protect your hands with oven mitts

or potholders when using the

Never cover the appliance with a

cloth. A fire may result.

appliance. Use only dry, heat resistant

potholders. Moist or damp potholders

used on hot surfaces can result in

steam burns. Do not let the potholder

touch the hot heating elements. Do not

use towels or other bulky items near the

appliance.

Be aware of loose fitting or hanging

garments when operating the

appliance, they may present a fire

hazard.

Never leave a combiset unattended

at high settings or when cooking with oil

or fat. Overheated oil could ignite.

Always heat oil slowly, monitoring it as it

heats.

Do not heat unopened containers.

Built-up pressure may cause the

container to burst and result in injury.

Never heat an empty pan unless the

pan manufacturer states that you can

do so.

Do not flambé under an exhaust

hood. Flames could be drawn up into

the hood by the suction and the grease

filters may ignite.

Do not use water on grease fires.

Smother or use a dry chemical or

foam-type extinguisher on any fire or

flame.

Only use the wok supplied with the

appliance. See "Use - Cookware".

Risk of fire.

IMPORTANT SAFETY INSTRUCTIONS

Make certain that the power cords of

small appliances do not come in

Do not use a steam cleaner to clean

this appliance. Steam could penetrate

electrical components and cause a

short circuit.

contact with the appliance. The

insulation of the cable could become

damaged. Danger of electric shock!

Do not allow solid or liquid sugar,

Be careful not to drop anything on

pieces of plastic or foil to fall on the

burners when they are hot. If these

residues are allowed to cool on the

ceramic surface pitting or even

cracking may occur.

the ceramic surface of the combiset.

Even lightweight objects may cause

damage.

Pot and pan handles should be

turned inward and not extend over the

countertop to reduce the risk of burns,

ignition of flammable materials, and

spills.

Any spills should be removed as

quickly as possible to prevent them

from burning on and becoming difficult

to remove.

Do not use pots or pans with

The manufacturer cannot be held

liable for damage caused by

non-compliance with these

Important Safety instructions.

pronounced edges or ridges on the

ceramic combiset. These could scratch

the combiset permanently. See

"Cookware" for more information. Grains

of salt and sand can cause scratches.

Make sure that the bases of any pots

and pans are clean, free of any fat or

oils, and are dry.

SAVE THESE INSTRUCTIONS

AND REVIEW THEM

PERIODICALLY

To prevent burns and breathing

difficulty, allow the combiset to cool

before cleaning. Some cleaners may

produce toxic fumes if applied to a hot

surface.

Keep the combiset clean. Salt,

sugar, and grit can cause scratches.

When wiping spills on a hot

combiset with a wet sponge or cloth, be

careful to avoid steam burns.

Do not let flammable materials,

i.e. cooking grease, accumulate on the

appliance.

Description of the unit

aWok burner C11 ³/₄" (30 cm)

Rating in watts: 2400 W

eDisplay

with Booster:

3200 W

No wok on burner

bWok pan (included)

cControl knob

dIndicators

Auto-heat

Fault (see "Frequently

asked questions")

C / 0 Safety cut-out feature

(see "Safety features")

Indicators

Booster "On"

Overheating protection

(see "Safety features")

fOn/Off indicator

Child safety lock

gBooster indicator

(see "Safety features")

h"Residual Heat" indicator

Before using for the first time

Clean the combiset

Heat the appliance

^ Before using for the first time, clean

the appliance with a damp cloth and

dry with a soft cloth.

When the combiset is first connected to

the power supply, and after a power

failure, all indicators in the display will

light up for approx. 1 second. The

combiset can be used as normal once

the indicators go out.

Do not use liquid dish soap to clean

the combiset, this may cause

permanent blue discolorations.

Metal components of the appliance

have a protective coating which may

give off a slight odor the first time

the appliance is heated.

The smell will dissipate after a short

time and does not indicate a faulty

connection or appliance defect.

Induction

How it works

Be careful not to place cutlery or

other metal objects on the combiset.

When the appliance is switched on,

or when there is residual heat

present, there is the risk of metal

objects heating up quickly.

An induction coil is located under the

burner. When the burner is switched

on, this coil creates a magnetic field

which impacts directly on the base of

the pan and heats it up. The burner

itself is heated indirectly by the heat

given off by the pan.

Beware of burns.

Depending on the material, other

objects left on the combiset could

also melt or catch fire.

This appliance will only work properly

when the wok pan (supplied) is used

(see "Cookware").

Turn the burner off after use.

The burner will not work:

– if it is switched on without the wok

pan in place.

– if the wok pan is taken off the burner

when it is switched on.

If this happens, ß will flash in the

display.

If the wok pan is placed on the burner

within 3 minutes, the ß will go out and

you can continue cooking as normal.

If the wok pan is not placed on the

burner, the burner and the combiset will

switch off automatically after 3 minutes.

0 will flash alternately with C in the

display.

To use the burner again as normal, first

turn the control knob to "0".

Induction

Noises

Cookware

The following noises can occur when

the induction wok is in use.

Only the wok pan supplied should be

used with this appliance. The wok pan

is designed specifically for this

induction wok.

– Higher power settings may cause a

buzz. This will decrease or cease

altogether when the power setting is

reduced.

,^{There is a danger of fat or food}

overheating and burning if other

woks are used.

– You may hear a clicking sound from

the electronic switches, especially on

lower settings.

The appliance has a cooling fan to help

extend the life of the electronics. When

the combiset is being used at high

levels for a long period of time, this will

come on and you will hear a whirring

sound. The fan may continue to run

after the appliance has been switched

off.

Use

Turning the combiset On/Off

Residual heat indicator

The residual heat indicator will go out

once the combiset has cooled to a safe

temperature.

,^{Do not leave the appliance}

unattended while in use.

As long as the residual heat

indicator is lit do not touch or place

any heat sensitive items on the

burner. Danger of burns, and fire

hazard.

To turn the combiset on turn the control

knob clockwise a to the desired power

level.

To turn the combiset off turn the control

knob counterclockwise b to "0".

The knob must only be turned

clockwise to turn the burner on and

counterclockwise to turn the burner

off.

When the combiset is turned on the

On/Off indicator lights up. Once the

combiset has reached a factory set

temperature the residual heat indicator

will light.

When the combiset is turned off the

On/Off indicator will go out.

Use

Settings

When Auto-heat has been activated,

the burner switches on automatically at

the highest setting and then switches to

the continued power level which was

selected. The "heat-up" time depends

on which continued power level has

been chosen (see table).

Use for

Power

level

Keeping food warm,

1 - 2

Melting chocolate, etc.

Warming food

Stir-frying

3 - 6

7- 9

Taking the wok off the burner while

Auto-heat is in operation interrupts the

function. It will resume if the wok is

placed back on the burner within

3 minutes.

Auto-heat

To activate Auto-heat

Continued

Heat-up time

(approx.)

power level

^ Turn the control knob

min : sec

counterclockwise as far as it will go

and hold until an A appears.

0 : 15

0 : 25

0 : 50

2 : 00

5 : 50

2 : 50

^ Turn the control knob clockwise to

the desired continued power level.

Once Auto-heat has been activated the

continued power level must be set

within 10 seconds. After this time the

level cannot be changed.

Changing the continued power level

after 10 seconds will deactivate the

Auto-heat function.

During the Auto-heat phase an A will

show in the display.

Use

Booster function

Activating the booster function

The induction wok is equipped with a

booster function to temporarily increase

the power level. When the Booster is

activated the burner will operate at

power level 9 with an extra boost of

power for 10 minutes.

^ Turn the control knob past power

level 9 to BI, then back to 9.

I appears in the display and the B

indicator lights up.

After 10 minutes the burner will

automatically switch back to power

level 9, the I symbol and the B indicator

will go out.

Taking the wok pan off the burner while

the booster is in operation interrupts the

booster function. It will resume if the

pan is placed back on the burner within

3 minutes.

Deactivating the booster function

The booster function can be turned off

early if desired.

If the wok reaches the maximum

temperature before the 10 minutes

has elapsed, the booster function

will switch off and the appliance will

resume at power level 9.

^ Turn the control knob past power

level 9 to BI; or simply reduce the

power level.

This function only works with the

supplied wok, which ensures that

the appliance will switch off if it gets

too hot.

Safety features

Child Safety Lock

Safety cut-out

The combiset has a safety cut-out

feature in case it is not turned off after

use.

Keep children away from the

combiset for their own safety.

The combiset has a Child Safety Lock

to prevent children from turning on the

burners.

If the burner is heated for an unusually

long period of time (see table), and the

power level settings are not adjusted,

the combiset will turn itself off

To activate the Child Safety Lock:

automatically and the residual heat

indicator will light.

^ Turn the control knob

counterclockwise as far as it will go,

and hold until L appears in the

display.

C and 0 will flash alternately in the

burner display.

^ To use the combiset again, first turn

the control knob to "0".

If the control knob is touched after the

lock is activated an L will appear in the

display for 3 seconds.

The On/Off indicator and the display

will go out.

To deactivate the Child Safety Lock:

Power level

Maximum

^ Turn the control knob

operating hours

counterclockwise as far as it will go,

and hold until the L goes out and 0

appears briefly in the display.

Safety features

Overheating protection

Overheating can be caused by:

The induction coils are fitted with an

overheating protection feature. This

prevents the induction coils from

overheating by:

– using the appliance for too long at

the maximum power level.

– there being insufficient ventilation to

the appliance.

– If the booster function is being used,

it will be switched off.

If a drawer is installed directly under

the combiset, sufficient space must be

kept between the drawer and its

– If the temperature continues to rise

after the booster function is switched contents and the underside of the

off, the power level will be reduced.

appliance in order to ensure sufficient

ventilation of the appliance.

– If the temperature still continues to

rise after the power level has been

If the overheating protection feature

reduced, the appliance will switch off triggers again, contact Miele Technical

and an H will appear in the display.

Service.

^ Turn the control knob to "0".

Once the H has gone out the combiset

can be used again as normal.

If the control knob is not turned back to

"0", C and 0 will flash in the display once

the burner has cooled. To use the

combiset again, first turn the control

knob to "0".

Cleaning and care

Do not use a steam cleaner to clean

this appliance. Steam could

penetrate electrical components and

cause a short circuit. Pressurized

steam could cause permanent

damage to the surface and to

components for which the

Clean any spills immediately before

they become difficult to remove.

Clean the appliance regularly,

preferably after each use. Allow the

appliance to cool before cleaning.

manufacturer cannot accept

responsibility.

Ceramic surfaces

^ Wipe off any soiling using a damp

cloth. Stubborn soiling is best

removed with a shielded scraper

blade.

Do not use any sharp pointed

objects which could damage the

seal between the ceramic surface,

the surrounding frame and the

countertop.

^ Apply a ceramic cleaner (available

from Miele) using a soft cloth or

paper towel.

Never use abrasive cleaners,

caustic (oven) cleaners, dishwasher

detergent, scouring pads, steel wool

or hard brushes. They will damage

the surface.

^ To remove any limescale deposits or

metallic residue apply a ceramic

cleanser using a soft cloth or use a

shielded scraper blade if necessary.

^ After cleaning wipe the ceramic

The ceramic surface can be cleaned

using a cleaner for ceramic

surfaces. Follow the manufacturer’s

instructions.

surface with a damp cloth and dry.

A cleaner with a special additive to

prevent water marks and smears on the

ceramic surface may be used.

Make sure that no cleaner residue

remains on the ceramic surface by

carefully wiping the combiset with a

damp cloth. They may damage the

combiset or produce toxic fumes

when heated.

Any melted solids like sugar, plastic or

aluminum foil should be removed as

soon as possible, while the burner is

still warm. If they are allowed to harden

the combiset may become pitted.

^ Turn the burner off.

^ Using a shielded scraper blade,

scrape the melted item immediately

off the burner while it is still hot.

Use caution: Danger of burns!

Be sure that pot and pan bases are

clean and dry.

After cleaning dry the ceramic

surface with a soft cloth to prevent a

build up of limescale deposits.

^ Allow the combiset to cool and clean

as previously described.

Cleaning and care

Stainless steel

Clean stainless steel surfaces with

warm water and liquid dish soap

applied with a non-abrasive sponge

and then wipe dry with a soft cloth.

Soak baked or hardened spills first to

loosen them.

Stainless steel surfaces can be cleaned

using a non-abrasive stainless steel

cleaner (available from Miele).

To help prevent resoiling, a conditioner

for stainless steel can also be used.

Apply sparingly with even pressure.

Do not use stainless steel cleaner on

or around the printing, it may rub

off. Use only a soft sponge with

some dish liquid and warm water to

clean this area.

Frequently asked questions

,^{Repairs should only be carried out by an authorized technician in}

accordance with local and national safety regulations. Unauthorized repairs

could cause injury or appliance damage. The manufacturer cannot be held

responsible for unauthorized work.

What if the appliance does not heat up after it is turned on?

Possible fault

Solution

The Child safety lock is activated.

See "Child safety lock".

The Overheating protection feature has See "Overheating protection".

activated.

The main fuse has blown.

Check the main fuse.

Remove the fuse or "trip" the circuit

breaker.

If none of the above is the case, turn the control to "0", and disconnect the

appliance from the electrical supply for 1 minute.

Reconnect the power and turn the appliance on. If it still does not heat, contact

Miele Technical Service.

What if ß appears in the display?

Possible fault

Solution

The burner is turned but the wok is not Turn the burner off and place the wok

placed on it. on the burner.

What if F and 01 flash alternately in the display?

Possible fault Solution

The control knob is either damaged or If this is not the case contact Miele

stuck. Technical Service.

What if F and a number flash alternately in the display?

Contact Miele Technical Service.

Frequently asked questions

What if the combiset turns itself off automatically?

Possible fault

Solution

Either the "Safety cut-out" feature or the See "Overheating protection" or "Safety

"Overheating protection" feature has cut-out".

been activated.

What if one of the following errors occurs:

- The booster function turns off automatically ahead of time.

- C and 0 flash alternately in the display.

Possible fault

Solution

The overheating protection feature has See "Overheating protection".

been activated.

The food does not cook when using auto-heat.

Possible fault

Solution

Large amounts of food are being

cooked.

Select a higher continued power level

or begin cooking at the highest level

and turn the power back by hand.

The cooling fan continues to run after the combiset was turned off.

Possible fault

Solution

This is not a fault.

The fan continues to run until the

appliance has cooled sufficiently. It will

turn off automatically.

Technical Service

In the event of a fault which you cannot

easily fix yourself, please contact the

Miele Technical Service Department at

the address on the back of this booklet.

When contacting Technical Service

please quote the serial number and

model of the appliance. This

information is visible on the silver data

plate supplied with the appliance.

Installation Instructions

IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE

To prevent accidents

and machine damage

read these instructions

before

installation or use.

SAFETY INSTRUCTIONS FOR INSTALLATION

Note to the installer:

This appliance has not been

Please leave this instruction book

with the consumer for the local

electrical inspector’s use.

designed for maritime use or for use in

mobile installations such as recreational

vehicles or aircraft. However, under

certain conditions it may be possible for

installation in these applications. Please

contact the Miele Technical Service

Department with specific requirements.

The minimum distances given in

these Installation Instructions must

be observed in order to ensure safe

operation. Failure to do so increases

the risk of fire.

You must ensure the power cord for

the appliance will not be subject to any

mechanical strain after installation.

The cabinetry and venting hood

should be installed first to prevent

damage to the appliance.

If a protective base is installed

beneath the appliance, a minimum

distance of 1 ⁹/₁₆" (40 mm) between the

top of the protective base and the

bottom of the appliance must be

maintained.

The countertop must be bonded

with heat resistant (212 °F/100 °C)

adhesive to prevent distortion or

dissolving.

The appliance must not be

Any back splashes must be

heat-resistant as well.

permanently sealed into the countertop

when installed. The sealing strip under

the edge of the appliance provides a

sufficient seal for the countertop. See

"Sealing".

The appliance must not be installed

over a dishwasher, washer, dryer,

refrigerator or freezer. Heat radiated by

the appliance may damage them.

Keep this instruction book in a safe

place for reference and pass it on to

any future user.

To eliminate the risk of burns or fire

by reaching over heated surfaces

cabinet storage space above the

appliance should be avoided. If cabinet

storage is necessary, the risk can be

reduced by installing a venting hood to

project horizontally a minimum of 5"

(127 mm) beyond the bottom of the

cabinets.

SAFETY INSTRUCTIONS FOR INSTALLATION

Safety distances above the

If there is more than one appliance

beneath a hood (e.g. wok burner

and electric combiset), and they

have different minimum safety

distances always observe the

greater distance.

appliance

The minimum safety distance given by

the hood manufacturer must be

maintained between the combiset and

the hood above it. See the installation

instructions of the hood for these safety

measurements.

If the hood manufacturers instructions

are not available or if flammable objects

are installed over the combiset (e.g.

cabinets, utensil rail, etc.), a minimum

safety distance of 30" (760 mm) must

be maintained.

SAFETY INSTRUCTIONS FOR INSTALLATION

Safety distances to the sides

of the appliance

The appliance should only be installed

as shown in the illustrations, while

(50 mm)

2 "

maintaining the required safety

distances shown. Do not install the

appliance between two tall cabinets,

this is a fire hazard.

A distance of at least 2" (50 mm) must

be kept between the countertop cut-out

and the rear wall because of the high

temperatures radiated.

recommended

The minimum distance a between the

worktop cut-out and a wall or tall unit to

the right or left of it is:

2" (50 mm)

for CS 1112

CS 1122

CS 1212

CS 1221

CS 1223

CS 1326

CS 1411

(50mm)

not recommended

6" (150 mm) for CS 1312

CS 1322

CS 1421

10" (250 mm) for CS 1011

CS 1012

CS 1028

not permitted

Installation

Safety distance when installing the appliance near a wall with trim or a back

splash

A minimum distance of 2" (50 mm) between the trim or back splash and the

countertop cut-out if required.

This distance is only necessary if these items are made of combustible materials

e.g. wood. If the trim or back splash is made of a non-combustible material, the

required safety distance can be reduced by the thickness of the wall covering

material.

aWall frame

bSheet rock or wall board

cTrim or back splash

dCountertop

eCountertop cut-out

f2" (50 mm) minimum clearance

Installation

Installation dimensions

aSpring clips

bAppliance front

cInstallation height

dPower supply box with connection cable L = 78 ³/₄" (2000 mm)

Installation

Cut out

If during installation the seal around

the frame does not sit flush with the

countertop in the corners, the corner

radius, maximum ³/₁₆" (4 mm), can

be carefully filed down to fit.

^ Make the worktop cut-out for one or

more appliances as applicable.

Remember to maintain a minimum

safety distance from the back wall,

as well as from any tall unit or side

wall to the right or left of the

appliance(s).